An Icy Tip (GB-9001):
To make cleaning the Juicing
Screen even easier, remove the nozzle from the drum cap, and try
placing crushed or small ice cubes through the feeding chute while
the juicer is still running. The hard pieces of ice will push any
excess through the screen, making it even easier for you to clean
out!
Be sure not to use either the Juicing
Nozzle or Mincing Nozzle
on the Drum Cap while doing this or anything else that
is of a very hard consistency.
IMPORTANT NOTE: We do not recommend trying this with the Samson Ultra KPE-1304 (Twin-gear).
Top^
Cleaning Parts:
Most of the parts for the GB9001 and KPE-1304 can but put in the dishwasher for cleaning. They MUST be put on the top shelf and not near the drying coil, otherwise they will warp. It is best to put the parts through the wash cycle, skipping the dry cycle.
Over time, juicer parts tend to stain. There are 2 home grown remedies that people have shared that reduce staining.
- Soak non- electric parts in a 50 / 50 percent white vinegar and water solution and let them sit overnight.
- Apply a paste made of Baking Soda and Water to the stained parts and let them sit overnight.
Top^
|
